DeFelsko STDS1 Certified Coated Metal Plates, Epoxy on Steel (Ferrous), for use with PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS and PosiTest F & FM
Similar Products to Consider
Ideal for use in the calibration lab, in the field or on the factory floor
Certified coated metal plates and polystyrene blocks are ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements.
Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, DeFelsko certified coating thickness standards have measured values traceable to a National Metrology Institution.
Features
- Used to verify the accuracy and operation of any Type 1 (mechanical) and Type 2 (electronic) magnetic, eddy-current or ultrasonic coating thickness gage
- Ideal for use in the calibration lab, in the field or on the factory floor
- Standards with steel or aluminum substrates consist of 4 plates mounted in a protective binder
- Polystyrene thickness standards consist of 4 blocks supplied in a rugged acrylic storage box
- Individually serialized for traceability to NIST or PTB - includes a Certificate of Calibration
- Certified and labeled in both Metric and Imperial units
- Accuracy: 0.43 m | 0.017 mil
Specifications
| Order Code | Ideal for | Coating / Substrate |
| STDS1 | PosiTector 6000 F, FS, FRS, FN, FNS, FNRS, FXS*, FNDS PosiTest F & FM | Epoxy on Steel (Ferrous) |
| STDS2 | PosiTector 6000 F0S, F45S, F90S, F90ES PosiTest DFT Ferrous & Combo | Epoxy on Steel (Ferrous) |
| STDS3 | PosiTest G & GM PosiPen A, B & C | Epoxy on Steel (Ferrous) |
| STDS4 | PosiTector 6000 FXS* | Epoxy on Steel (Ferrous) |
| STDA1 | PosiTector 6000 N, NS, NRS, FN, FNS, FNRS, FNDS | Epoxy on Aluminum (Non-Ferrous) |
| STDA2 | PosiTector 6000 NAS, N0S, N45S, N90S PosiTest DFT Combo | Epoxy on Aluminum (Non-Ferrous) |
| STDA3 | PosiTector 100B, 200, 200B | Epoxy on Aluminum (Non-Ferrous) |
Order Guide
| Order Code | Approximate Thickness | |||
| Plate 1 | Plate 2 | Plate 3 | Plate 4 | |
| STDS1 | 0 | 75 m 3 mils | 250 m 10 mils | 1500 m 60 mils |
| STDS2 | 0 | 75 m 3 mils | 250 m 10 mils | 1000 m 40 mils |
| STDS3 | 0 | 15 m 0.6 mils | 40 m 1.6 mils | 100 m 4 mils |
| STDS4 | 0 | 75 m 3 mils | 1000 m 40 mils | 1900 m 75 mils |
| STDA1 | 0 | 75 m 3 mils | 250 m 10 mils | 1500 m 60 mils |
| STDA2 | 0 | 75 m 3 mils | 250 m 10 mils | 500 m 20 mils |
| STDA3 | 75 m 3 mils | 125 m 5 mils | 250 m 10 mils | 500 m 20 mils |
*PosiTector FXS probes witha range of 0-1500 um (0-60 mils) and Serial Numbers <361485 should use the S1 Standard.
All certified standards are supplied with a Certificate of Calibration traceable to NIST or PTB.
Plate Diameter: 38 mm (1.5") Measurement Diameter: 25 mm (1")
Downloads
 | DeFelsko Accessories for Inspection Instruments - Online Catalog |
